This is a standard table about the area found under (beneath) a Normal curve at various points along that curve.
Basic Method Validation is part of a trilogy of “back to basics” books that focus on analytical quality management. The other two books are Basic QC Practices and Basic Planning for Quality. When I teach these materials, I start with method validation because it introduces the basic concepts of analytical performance and the experimental and statistical techniques needed to describe performance in quantitative terms. These concepts carry through into the practice of QC and the selection of optimal QC procedures via quality design and planning.
This is an Normalized OPSpecs chart with 50% AQA (analytical quality assurance) and with N=2 (2 control measurements).
This is an Normalized OPSpecs chart with 50% AQA (analytical quality assurance) and with N=2 (2 control measurements).